• Κινητήρες
  • ΑΣΥΓΧΡΟΝΟΙ ΚΙΝΗΤΗΡΕΣ / INVERTER MOTORS
  • ΚΙΝΗΤΗΡΕΣ ΦΡΕΝΟΥ
    • Σειρά BA
    • Σειρά BM
    • Σειρές BAPV, BMPV με προοδευτική εκκίνηση - φρενάρισμα
    • Σειρά BAF με εξαιρετικά υψηλή ροπή πέδησης
    • Σειρά BASV με εξαναγκασμένη ψύξη
    • Σειρές BAE, BMEAV με ενσωματωμένο encoder
    • Σειρά BMBM με διπλό φρένο
    • Σειρά BAPK για ανύψωση
  • ΚΙΝΗΤΗΡΕΣ ΣΥΝΕΧΟΥΣ ΡΕΥΜΑΤΟΣ (DC)
  • ΗΛΕΚΤΡΟΜΕΙΩΤΗΡΕΣ
  • ΗΛΕΚΤΡΟΜΕΙΩΤΗΡΕΣ ΓΙΑ ΔΕΞΑΜΕΝΕΣ ΓΑΛΑΚΤΟΣ ΜΕ ΣΥΣΤΗΜΑ ΞΕΠΛΥΜΑΤΟΣ
  • ΗΛΕΚΤΡΟΜΕΙΩΤΗΡΕΣ ΣΥΝΕΧΟΥΣ ΡΕΥΜΑΤΟΣ (DC)
  • ΚΙΝΗΤΗΡΕΣ ΓΙΑ ΕΠΑΓΓΕΛΜΑΤΙΚΕΣ ΨΗΣΤΑΡΙΕΣ
  • ΤΥΜΠΑΝΟΚΙΝΗΤΗΡΕΣ
• Αντιστροφείς (Inverters)
• Μειωτήρες
• Σύνδεσμοι & Άξονες Μετάδοσης Κίνησης
• Αντλίες
• Δονητές
• Σφιγκτήρες Άξονα

The BM series consists of three phase, asynchronous brake motors totally enclosed fan cooled (TEFC).

BM series range starts from 56 up to 160 frame size.

The motor brakes in case of power supply failure. The brake torque remains the same in both directions of rotation and the motor brakes without shaft axial sliding. As standard the brake is DC voltage supply with a built-in rectifier fitted inside the terminal box. The rectifier is provided with over-voltage and radio frequencies emission protection devices. Two different types of rectifier wiring can be chosen according to two different brake intervention time.

BM series is designed in order to have a braking action as quiet as possible. BM series motors tolerate a high overloading rate and are capable to withstand overheating so to guarantee best reliability also under tough operating conditions. The cooling fan is fitted at non-drive shaft end.

All MGM motors have been designed to be controlled by inverters. The motor winding insulation is class F, while class H is available on request. Motor construction type is totally enclosed externally cooled and IP54 enclosure (IP55 and IP56 available on request).

Motors up to 132 frame size are fitted as standard with a hexagonal hole on the shaft at non drive end to allow manual rotation, even if power is off. On request, BM series motors can be provided with side manual brake release lever. The brake disc lining material is asbestos free and the lining mixture is formulated to have a high friction coefficient and long lasting.

BM series motor frame is made of die cast, light metal on motors up to 132 size and the terminal board box, provided with cable glands and plugs, is positioned 180° above the motor support feet. The frame is made of cast iron starting from 160 frame size and the terminal box is located on the right side (drive-end view). Shields and flanges are made of aluminium on motors up to 90 frame size, and of cast iron on motors of 100 frame size and above. On IM B3 mounting (foot mounted) feet are frame integrated (they are not simply attached to the frame) as standard and it makes the motor very sturdy. This feature is very important for those applications where the motor is much stressed during the starts and stops.

BM series main features are the low braking noise, gradual acceleration during the motor start and stop and reduced overall dimensions.

Χαρακτηριστικά

• Brake Motors
• IEC Metric Motors frame from 56 to 160 frame size
• Totally Enclosed Fan Cooled (TEFC)
• IP 54 enclosure (IP55 on request)
• F class insulation
• Continuous Duty
• 230/460V 60Hz, 575V 60Hz or 230/400V 50Hz for Europe
• DC Brake
• Low noise brake
• Aluminum frame up to 132 frame size, 160 frame size in cast iron
• Cast iron flange starting from 100 frame size
• cCSAus approved ( mark)
• mark for Europe

Κατάλογος Κινητήρων Φρένου BM