KBRC
SCR Drive “Regen Reversing” - NEMA4X/IP65
The KBRC-240D is a Full-Wave Regenerative Drive in a NEMA-4X / IP-65 washdown and watertight enclosure. It is designed to operate 90 and 180 Volt Permanent Magnet and Shunt Wound DC motors in a bidirectional mode. It provides 4-quadrant operation, which provides forward and reverse torque in both speed directions. Motor overload protection (I x t) will shut down the control if the motor is overloaded for a predetermined amount of time. The exclusive Auto-Inhibit® circuit allows safe, smooth starting during rapid cycling of the AC line.
The KBRC-240D can be operated from a two or three wire start/stop circuit or can be started from the AC line. A set of dedicated normally open or normally closed relay contacts are provided, which are activated via the start/stop circuit. Main features of the KBRC-240D include Speed or Torque control modes. In addition, Regenerate-to-Stop (RTS) or Coast-to-Stop (CTS) stopping modes are also provided.
Standard front panel features of the KBRC-240D include diagnostic LEDs (for Power On, Stop and Overload), a Start/Stop Switch and a Main Speed Potentiometer. Other features include Barrier Terminal Blocks, adjustable trimpots, selectable jumpers and LEDs. The KBRC-240D is available in black finish or white FDA approved finish. Accessories include: SIRC Signal Isolator (KB P/N 8842), switches for AC Line ON/OFF, Fwd-Stop-Rev and Auto/Manual.